Knowledge base
Cisco
SPA 501 – IVR Configuration Menu
When setting up a Cisco SPA501, it does not have an on screen display so a voice menu is provided to setup the device.
Press the menu button to bring up the voice setup menu
| Function | Code |
| Access IVR | **** |
| Announce WAN IP address | 110 |
| Control WAN port admin web server [1 to enable, 0 disable] |
7932 |
| Reset to ITSP defaults | 877778 |
| Factory reset | 73738 [R-E-S-E-T] |
| Exit IVR | 3948 [E-X-I-T] |
| Announce DHCP | 100 |
| Enable DHCP [0 for DHCP, 1 for static IP, 3 for PPPoE] |
101 |
| Set WAN port static IP address [* for period, disable DHCP first] |
111 |
| Announce WAN netmask | 120 |
| Set WAN netmask [* for period, disable DHCP first] |
121 |
| Announce WAN gateway IP address [* for period, disable DHCP first] |
130 |
| Set WAN gateway IP address [* for period, disable DHCP first] |
131 |
| Announce MAC address |
140 |
| Announce firmware version | 150 |
| Announce primary DNS IP address |
160 |
| Set primary DNS server IP address [* for period, disable DHCP first] |
161 |
| Announce admin web server WAN port |
170 |
| Reboot the device | 732668 [R-E-B-O-O-T] |